- Current:home > >PRODUCT RANGES > TPE-S > PC/ABS Over-molding
- PC/ABS Over-molding
TPE ABS/PC over-molding 32N/32K
Test Items |
Test Method |
32N45 | 32N50 | 32N60 | 32N70 | 32N80 | 32N85 | 32K45 | 32K50 | 32K60 | 32K70 | 32K80 |
Hardness, Shore(A) |
ASTM |
45A | 50A | 60A | 70A | 80A | 85A | 45A | 50A | 60A | 70A | 80A |
Density(g/cm3) |
ASTM D792 |
1.19 | 1.19 | 1.19 | 1.22 | 1.24 | 1.24 | 0.96 | 0.96 | 0.98 | 1.02 | 1.08 |
Tensile Strength(Mpa) |
ASTM D412 |
2.8 | 5.8 | 6.3 | 7.2 | 9.2 | 10.5 | 6.9 | 7.2 | 7.9 | 12 | 16 |
Elongation(%) |
ASTM D412 |
450 | 450 | 450 | 450 | 450 | 450 | 500 | 500 | 500 | 500 | 500 |
Compression Set 23℃,22hrs(%) |
ASTM D395 |
22 | 26 | 26 | 22 | 25 | 24 | 26 | 24 | 24 | 23 | 21 |
Compression Set |
ASTM D395 |
36 | 45 | 45 | 42 | 38 | 38 | 45 | 42 | 40 | 38 | 38 |
NOTE:The data in above table is typical data, is not garanteed, properties can chang because of different processing conditions, we expressly disclaims any and all liability for any damages or injuries arising out of any activites relating in anyway to this publication.